鐵藝大門在我們的生活中是比較常見的，也是使用較多的，而在使用的過程中。我們自然要注意其特點，那么對于鐵藝大門的實用性和裝飾性你了解嗎？鐵藝大門讓你的大門使用的時間更長。鐵藝大門的產生是伴隨著一個新建筑、新家庭、新裝飾、新店面的誕生，一個鐵藝應用的機會就來臨了。

　　1、安全性和通透性

　　現代都市生活節(jié)奏很快，安全感對人們越來越重要。

　　2、體現私有性

　　尊重個人隱私，保護私有財產是社會文明的體現。

　　3、突出展示性

　　鐵藝本身就意味著擁有說不出的富足，擁有鐵藝中的珍品，不僅是個人某種情結的張揚，更是對歷史的追憶，對異國情調的崇尚。

　　4、持久性和環(huán)保概念

　　鐵藝之所以能在建筑和裝飾材料中占有一席之地，是因為鐵藝本身有良好的強度、抗風性、抗老化、抗蟲害，這是其它材料難以比擬的。

　　鐵藝大門表面處理應該從哪幾方面入手？別墅鐵藝大門用的材料有方管、鍛打方管、方鋼、矩形管、鍛打矩形管、鍛打方鋼、圓鋼、扁鐵、鍛打扁鐵、鐵板、瑪鋼件、沖壓件、門軸等。以下是山東鋁藝總結的如何處理鐵藝大門表面的方法：

　　一、鐵藝大門在噴漆 噴漆前，用濕布全面擦凈別墅鐵藝大門的各個部位，不能留有灰塵等。第一道給鐵藝大門噴防銹漆，漆膜干透后噴第二道黑漆，最后噴一道清漆。注意不能有漏噴部位，也不能產生流掛等缺陷。個別細微處可用刷子刷涂補漆。

　　二、清除焊渣別墅鐵藝大門的焊接部位較多，必須認真清除每個焊接部位的焊渣。先用板銼或扁鐵敲打除渣，然后用磨光機和砂布打磨焊縫，使其平滑。對飛濺到其他部位的焊渣也要順勢清除干凈。

　　三、打磨原子灰 干透后，用磨光機和砂布全面打磨大門的各個組件，尤其是涂抹原子灰的部位更要磨光。

　　四、涂抹原子灰用原子灰加固化劑(比例50:1)攪拌均勻，涂抹在焊接部位，處理焊縫缺陷。

　　通過以上的了解，你知道鐵藝大門具有的特點了吧！鐵藝大門實用性和裝飾性讓你使用的時間更長。需要和定制鐵藝大門找鐵藝大門，我們的質量不僅僅指產品的內在質量，還包括產品質量、服務質量等一系列因素。因此必須全面地、最大限度地滿足消費者的需求。濟南鐵藝大門

Iron gate in our life is more common, but also use more, and in the use of the process. We should pay attention to its characteristics naturally, so do you understand the usefulness and decoration of iron gate? Iron gate allows your door to last longer. The emergence of the iron gate is accompanied by a new building, new family, new decoration, the birth of a new shop, an opportunity for the application of iron is coming.

1. Safety and permeability

With the fast pace of modern urban life, security is becoming more and more important to people.

2. Privacy

Respect for personal privacy and protection of private property is the embodiment of social civilization.

3, highlight the display

Iron art itself means to have the wealth that cannot say, have the treasure in iron art, it is not only the make public of some kind of complex of individual, it is to recall to history more, advocate to exotic emotional appeal more.

4. Persistence and environmental concepts

The reason why iron art can occupy a place in the building and decoration materials is that iron itself has good strength, wind resistance, aging resistance, resistance to insect pests, which is incomparable with other materials.

From which aspects should the surface treatment of iron gate proceed with? The materials used for the iron gate of villa are square pipe, forging square pipe, square steel, rectangular pipe, rectangular pipe, square steel, round steel, flat iron, forging flat iron, iron plate, malleable steel pieces, stamping pieces, door shaft, etc. The following is a summary of shandong aluminum art how to deal with the iron gate surface method:

A, the iron gate in the painting before painting, with wet cloth comprehensive wipe villa iron gate of each part, can not leave dust and so on. The first door to spray rustproof paint, paint film dry spray second black paint, the last spray a varnish. Note that there should be no leakage or sag defects. Individual fine place can brush besmear to mend paint.

Second, remove welding slag villa iron gate welding site more, must carefully remove every welding site of welding slag. The slag is removed by beating with a flat iron or a flat file, and then the weld is polished with a polishing machine and emery cloth to make it smooth. To splash to other parts of the welding slag should also be homeopathic clean.

3. After the putty is completely dried, polish all components of the door with a polishing machine and emery cloth, especially the parts daubed with putty.

4. Apply putty with putty hardener (proportion: 50:1), stir evenly, apply on the welding site, and deal with weld defects.